Key Specifications Table This Millipore KWSCA3TTT1 Opticap XLT30 Milligard 1.2/0.5 µm 1-1/2 in. TC/TC Filter is in unused condition and is guaranteed to be fully functional. This filter came from a local manufacturer that had surplus new old stock inventory. We urge customers to view all photos as they show overall condition, included accessories and useful information. Please feel free to contact us with any questions. The following information was taken directly from Millipore's site: Description Catalogue Number KWSCA3TTT1 Trade Name Opticap Description Opticap XLT30 Milligard 1.2/0.5 µm 1-1/2 in. TC/TC Product Information Format Double Layer Device Configuration Capsule Connections, Inlet/Outlet 38 mm (1-1/2 in.) Sanitary Flange Filter Grade Standard Milligard Media Housing Material Polypropylene (PP) Maximum Differential Pressure, bar (psid) 3.5 bar (50 psid) @ 25 C Maximum Inlet Pressure, bar (psi) 5.5 bar (80 psi) @ 23 C; 2.75 bar (40 psi) @ 60 C; 1.0 bar (15 psi) @ 80 C Good Manufacturing Practices These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. T-line/Gauge Port T-line Quality Level MQ400 Biological Information Bacterial Endotoxins Aqueous extraction contains ?0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test Media Milligard Sterilization 3 autoclave cycles of 30 min @ 121 C; not in-line steam sterilizable Physicochemical Information Pore Size 1.2 / 0.5 µm Inlet Connection Sanitary Flange Outlet Connection Sanitary Flange Gravimetric Extractables The extractables level was equal to or less than 165 mg per capsule after 24 hours in water at controlled room temperature. Indirect Food Additive All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. Maximum Inlet Pressure (psig) 80 psig Maximum Inlet Temperature 25 C Non-Fiber Releasing This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). USP Bacterial Endotoxins A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. Dimensions Cartridge Nominal Length 30 in. (75 cm) Length 87.1 cm (34.3 in.) Filtration Area 2.07 m Inlet to Outlet Width 15.2 cm (6.0 in.) Device Size 30 in. Inlet Connection Diameter 1-1/2 in. Nominal Pore Size 1.2 / 0.5 µm Outlet Connection Diameter 1-1/2 in. Materials Information Chemistry Mixed Cellulose Esters (MCE) Device Material Polypropylene Seal Material Silicone (SI) Support Material Polyester Vent Cap Material Polypropylene (PP) Packaging Information Material Size 1 Material Package Double Easy-Open bag Specifications Oxidizable Substances Will meet the USP Oxidizable Substances Test requirements after a water flush of ?15 L RETAIL PRICE: USD 598.00