Fall Protection Safety Harness Osha/Ansi Compliant,Internal Shock Absorbing Polyester Imported ANSI/ASSE Z359.11-2014 COMPLIANT: Ymachray Full Body Harnesses have the fully passed test report performed at authoritative laboratory in accordance with ANSI/ ASSE Z359.11-2014 and in compliance with the requirements of ANSI Z359.13-2013. Or the user must read and fully understand the limitations and proper use of the Fall protection equipment, and be properly trained by the Competent Person prior to use. SAFETY DESIGN PERFORMANCE: Ymachray Full Body Harnesses are used for fall arrest, positioning, travel restraint, suspension and rescue applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. After a fall, our Full Body Harness will support users and post fall at an angle within 30 to vertical. HEAVY DUTY D-RING: One back dorsal ring is all it takes to provide functionality on the construction job. The dorsal ring is used for fall arrest can be used for travel restraint or rescue. The pass-through buckles on our universal harness are made out of synthetic material that is superior to polyester. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute ASTM F1774 standards. WARRANTY: All the Ymachray Full Body Harness Kit have the fully passed test report in accordance with ANSI/ASSE Z359.11-2014 ANSI Z359.13-2013. ASTM F1774 Certified ,SAFE and GUARANTEED. 45 Days Money-Back 2 Years Warranty, When You Are Not Satisfied with Our Product, Please Don't Hesitate to Contact Us. BUY WITH CONFIDENCE. Double Leg Internal Shock Absorbing Safety Fall Protection Lanyard ASTM F1774 Certified: The Shock Absorbers are designed for up to 6-foot free fall applications with a maximum capacity up to 310 lb. (141 kg) including clothing, tools, etc. with a maximum deployment distance of 48 inch/1.2m average arresting force 900lbs. Statically tested with a minimum breaking strength more than 5,000 pounds (22.2 kN).