1:100 Scale Plastic Snap-Fit ? Airbus A220 Delta Airlines ? Length:14" Wingspan: 13.75" These models from Flight Miniatures are made of plastic and don't need any glue or paints. The assembly is very basic and takes only a few minutes. Assembly consists of nothing more than attaching the wings to the fuselage and then attaching the tail and elevators. Special care has to be taken while attaching the wings since the fitting in these models is quite tight and some pressure needs to be applied. The pressure needs to be applied on the wings and onto the fuselage. Do not, for example, hold the wings from the engines and apply force like that since this will damage and/or break the engine. The level of detail is very nice and accurate. Wings will show the different panels and sections just as the real thing. The coloring and markings are not decals, so they won't peel off. For the people who are really observant, engines are accurately proportioned and the type of engine is also accurately represented. These type of models are the type which one can see in airline offices and/or at travel agents (when they were still around). This is not a toy. Recommended for 15 and up. The Airbus A220 is a family of five-abreast narrow-body airliners by Airbus Canada Limited Partnership (ACLP). It was originally developed by Bombardier and had two years in service as the Bombardier CSeries. The program was launched on 13 July 2008. The smaller A220-100 (formerly CS100) made its maiden flight on 16 September 2013, received an initial type certificate from Transport Canada on 18 December 2015, and entered service on 15 July 2016 with launch operator Swiss Global Air Lines. The longer A220-300 (formerly CS300) first flew on 27 February 2015, received an initial type certificate on 11 July 2016, and entered service with airBaltic on 14 December 2016.