Research Equipment (London) ICI Analog Cone and similar items

Research Equipment (London) ICI Analog Cone and Plate Viscometer We gladly ship worldwide*! Research Equipment (London) ICI Analog Cone and Plate Viscometer with single speed motor and variable temperature control. Research Equipment (London) Ltd manufactures a range of cone and plate Viscometers which were originally known as the "ICI" Cone and Plate Viscometers. The model is recognized by the British Standards Institution and established a British Standard (BS3900) in 1968 and an American Standard (A7, ASTM D 4287, ISO 2884). The ICI Type Cone Plate Analogue Viscometer Outstanding Advantages Offered 1 Small sample 2 Speed of measurement 3 Wide temperature range 4 Thermostatic control 5 Ease of cleaning The high temperature Viscometer has been designed for the control of the viscosity of resins, bitumens, hot melts and similar products, during manufacture. These Viscometers enable a very small sample from the cooking vessel to be checked for viscosity in less than a minute. The instrument is thermostatically controlled over a wide range of temperatures, one of which is selected so that the melt viscosity of the resin comes within the viscosity of the instrument. In this way, thinning tests are eliminated and a quick and accurate determination of resin viscosity is obtained. Ease of cleaning is ensured by virtue of the small sample required and the ease of access which is possible with the simple geometry of the cone and plate principle. A wipe with paper tissue and suitable solvent is all that is normally required. Specifications Electrical supply 220-240 Volts or 110-120 Volts 50/60 Hz single phase. Power 125 Watts Standard viscosity range 0-2 poises at 10,000 sec-1 0-2.5 poises at 10,000 sec-1 0-5 poises at 10,000 sec-1 0-10 poises at 10,000 sec-1 0-20 poises at 2,500 sec-1 0-40 poises at 2500 sec-1 0-100 poises at 2500 sec-1 Cone Type To suit range: 0-2, 0-2.5, 0-5, 0-10, 0-20, 0-40, 0-100 poises Accuracy +/- 2% of full scale, confirmed using PRA oils traceable to National Standards. Warm-up from cold: 15 minutes Temperature control of sample: One or three switched temperatures in the range 10 degrees C - 75 degrees C, six temperatures in the range 25 degrees C - 230 degrees C. Time for sample to obtain control temperature: 20 seconds Ambient Temperature H.T. Instrument: To calibrate the high temperature instrument at 25 degrees C, the ambient temperature should be 20 degrees C. Ambient Temperature L.T. Instrument: The ambient temperature will affect the instrument lowest temperature. Lowest temperature achieved is 10 degrees C. below ambient. The low temperature Viscometer has been designed to facilitate routine measurement of the viscosity of paints. Good correlation with application methods (e.g. brushing) is ensured by the use of a high rate of shear (10,000 sec-1). The cone plate principle is selected because this is one of the most convenient ways of obtaining high rates of shear. The ranges of measurement of 0-2, 0-5 poises and 0-10 poises are chosen as suitable for most normal paints. Alternative rates of shear or ranges of measurement can be obtained by using cones of alternative size or angle. Temperature control is essential in measuring the viscosity of paint. This Viscometer has built-in provision for holding the sample at the temperature regardless of normal variations in the bulk sample or in room temperature. Heating or cooling of the sample is by a Peltier effect semi-conductor device. The sample reaches the control temperature in no more than 15 seconds. "A sample a minute" is well within the capacity of this Viscometer. Item is in good physical condition and came from a lab that closed. Item powers up . Don't forget to place your bid. on this sale you agree to the following terms: Shipping Terms: Buyer pays all shipping costs. Shipments made to California must include 8.0% sales tax unless we are provided with a valid resale certificate. We reserve the right to ship with Fedex ground, USPS and any other carrier in the best interests of the buyer and seller. The Parcel post option is only available to alaska, Hawaii, and US territories only. If you select parcel post and you live in the lower 48 states you package may be sent by another carrier and/or an additional shipping amount may be required. If the shipping cost quoted is over $150, that means it will be shipped freight, and the price quoted is for pickup at a freight terminal nearby your location (usually within 25 mi if you are in a major US city). if you need residential delivery, or if you don't have a forklift/loading dock the price will be higher in some cases. Payment Terms: Payment is to be made by PayPal Please contact us if you have any questions about's recent payment policy change. Payment is to be received within ten days of close of auction. Should payment not be received within ten days the item will be re-listed and high bidder will forfeit. International Terms: (These terms only apply to international shipments.) Buyer is responsible for all brokerage, customs, and or duty charges. *Not all items are available for international shipment due to import/export regulations. In the event that we are unable to ship to buyers country, buyer will receive a full refund. Payment must be made in US Dollars. Money must be drawn against a US bank. Warranty Terms: No warranty nor guarantee is expressed or implied regarding: usability, functionality, merchantability, or cosmetic appearance of the item(s) in auction. What you see in the picture(s) is what you get nothing more nothing less. Test results of item(s) in auction are described to the best of our ability in the ad. The results of all tests that are performed are disclosed in the ad. Items sold as "Untested" are simply that we have been unable to test the item(s) due to missing cables/adapters/toner cartridge/ksu/etc, lack of time, or other restrictions, Such as when we sell a laptop that we don't have an AC adapter for. Our only guarantee is that you will receive the make and model listed in the ad. The maximum liability of BigonBusiness (the seller) is the high bid of the auction. Return Terms: Returns are only allowed under cases of gross misrepresentation in the ad, such as when we describe a monitor as a fax machine. Such claims of misrepresentation must be filed within three days of receipt of shipment. Best Stuff To You reserves the right to replace the item(s) or refund the high bid solely at our discretion. Item must be returned in the original box and packaging. Bidder must request a RMA number before returning item(s). Packages returned without a RMA number will become property of Best Stuff To You ten days after receipt unless buyer has paid return shipping within the ten day period. Shipping Damage Terms: Seller will file a shipping claim(s) upon behalf of the buyer with common carrier in the event shipment(s) is/are damaged during shipping, provided bidder has purchased insurance. Not retaining the original box and packaging may affect the carriers decision on a claim. Seller will commence filing the claim once buyer has filed the damage report with the seller. Buyer must notify seller within 48 hours of receipt of a damaged shipment. If any provision of this sale Contract is held unenforceable, All remaining provisions of this Contract shall remain in full force and effect. Copyright 2015 BigonBusiness - All Rights Reserved. sale Wizard 2000 - The Complete Auction Management Software Solution