Optical Hand Edger Manual Lens Edger Water and similar items

110v 50w Hand Edger Manual Lens Edger Instruction This machine is suitable for grinding a variety of materials: resin, glass, PC, stone, cutting tools, etc. It has High quality material and intelligent design, also, it is easy to operate. Operation When this machine is to be used, connect the hose with the adaptor of the lower water can. The place the lower water can onto the bottom of the machine (the water can run out either in the front or at the back) and lead the drain pipe to the sewer tunnel. Place the upper water can on the top of the machine and let in the clean water. When the machine is used for the first time, take the sponge out from under the water valve, put it into the water, press it with your hand and the put it back in its original place after it absorbs enough water. Open the water valve and let the water drip at 80-100 drops a minute. Then turn on the switch. The machine is ready to be used. If Model W grinding wheel is chosen, the right side will be rough ground ,and the left side fine ground. When Model WV grinding wheel is chosen the result with be the same, but there is also a V-shaped slot to refine the lens After the machine is used for a period of time, take the lower water can out and clean it in case the draining hole should be blocked. When the grinding wheel has been used for a period of time, grinding fatigue will appear (failing to grind in). In this case, use the oilstone stick to recondition the wheel. While this is being done, open the water valve The reversible button on the left side of the machine is a backward or forward adjustor (not used often). When it is required to run in normal direction or opposite direction, the chief power switch should be turned off or machine will be damaged. Parameters Grinding wheel material Diamond grinding wheel Rotating speed 5500-6000r/min Grinding wheel specification 3.5cm/1.37" Net weight 4kg/2.2lbs Grinding wheel size 280#:0.74",180#:0.62" Package Size 34*22*22cm/13.3"*8.6"*8.6" Notice The drain hose for new machines is placed in the sink at the bottom of the machine. When using it for the first time, please pull out the sink, take out the hose and connect it to the drain. Detail Display No.1 Double stand support Higher stability No.2 Diamond grinding wheel 280# fine grinding, 180# coarse grinding ? No.3 Detachable sink Easier to change water ? No.4 Adjustable water output Adjustable according to different materials ? Item Number: 153134 You can make order with no worries. Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends public holidays. Warranty: 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost. 110v 50w Hand Edger Manual Lens Edger Instruction This machine is suitable for grinding a variety of materials: resin, glass, PC, stone, cutting tools, etc. It has High quality material and intelligent design, also, it is easy to operate. Operation When this machine is to be used, connect the hose with the adaptor of the lower water can. The place the lower water can onto the bottom of the machine (the water can run out either in the front or at the back) and lead the drain pipe to the sewer tunnel. Place the upper water can on the top of the machine and let in the clean water. When the machine is used for the first time, take the sponge out from under the water valve, put it into the water, press it with your hand and the put it back in its original place after it absorbs enough water. Open the water valve and let the water drip at 80-100 drops a minute. Then turn on the switch. The machine is ready to be used. If Model W grinding wheel is chosen, the right side will be rough ground ,and the left side fine ground. When Model WV grinding wheel is chosen the result with be the same, but there is also a V-shaped slot to refine the lens After the machine is used for a period of time, take the lower water can out and clean it in case the draining hole should be blocked. When the grinding wheel has been used for a period of time, grinding fatigue will appear (failing to grind in). In this case, use the oilstone stick to recondition the wheel. While this is being done, open the water valve The reversible button on the left side of the machine is a backward or forward adjustor (not used often). When it is required to run in normal direction or opposite direction, the chief power switch should be turned off or machine will be damaged. Parameters Grinding wheel material Diamond grinding wheel Rotating speed 5500-6000r/min Grinding wheel specification 3.5cm/1.37" Net weight 4kg/2.2lbs Grinding wheel size 280#:0.74",180#:0.62" Package Size 34*22*22cm/13.3"*8.6"*8.6" Notice The drain hose for new machines is placed in the sink at the bottom of the machine. When using it for the first time, please pull out the sink, take out the hose and connect it to the drain. Detail Display No.1 Double stand support Higher stability No.2 Diamond grinding wheel 280# fine grinding, 180# coarse grinding ? No.3 Detachable sink Easier to change water ? No.4 Adjustable water output Adjustable according to different materials ? Item Number: 153134 You can make order with no worries. Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends public holidays. Warranty: 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost. 110v 50w Hand Edger Manual Lens Edger Instruction This machine is suitable for grinding a variety of materials: resin, glass, PC, stone, cutting tools, etc. It has High quality material and intelligent design, also, it is easy to operate. Operation When this machine is to be used, connect the hose with the adaptor of the lower water can. The place the lower water can onto the bottom of the machine (the water can run out either in the front or at the back) and lead the drain pipe to the sewer tunnel. Place the upper water can on the top of the machine and let in the clean water. When the machine is used for the first time, take the sponge out from under the water valve, put it into the water, press it with your hand and the put it back in its original place after it absorbs enough water. Open the water valve and let the water drip at 80-100 drops a minute. Then turn on the switch. The machine is ready to be used. If Model W grinding wheel is chosen, the right side will be rough ground ,and the left side fine ground. When Model WV grinding wheel is chosen the result with be the same, but there is also a V-shaped slot to refine the lens After the machine is used for a period of time, take the lower water can out and clean it in case the draining hole should be blocked. When the grinding wheel has been used for a period of time, grinding fatigue will appear (failing to grind in). In this case, use the oilstone stick to recondition the wheel. While this is being done, open the water valve The reversible button on the left side of the machine is a backward or forward adjustor (not used often). When it is required to run in normal direction or opposite direction, the chief power switch should be turned off or machine will be damaged. Parameters Grinding wheel material Diamond grinding wheel Rotating speed 5500-6000r/min Grinding wheel specification 3.5cm/1.37" Net weight 4kg/2.2lbs Grinding wheel size 280#:0.74",180#:0.62" Package Size 34*22*22cm/13.3"*8.6"*8.6" Notice The drain hose for new machines is placed in the sink at the bottom of the machine. When using it for the first time, please pull out the sink, take out the hose and connect it to the drain. Detail Display No.1 Double stand support Higher stability No.2 Diamond grinding wheel 280# fine grinding, 180# coarse grinding ? No.3 Detachable sink Easier to change water ? No.4 Adjustable water output Adjustable according to different materials ? Item Number: 153134 You can make order with no worries. Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends public holidays. Warranty: 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost. 110v 50w Hand Edger Manual Lens Edger Instruction This machine is suitable for grinding a variety of materials: resin, glass, PC, stone, cutting tools, etc. It has High quality material and intelligent design, also, it is easy to operate. Operation When this machine is to be used, connect the hose with the adaptor of the lower water can. The place the lower water can onto the bottom of the machine (the water can run out either in the front or at the back) and lead the drain pipe to the sewer tunnel. Place the upper water can on the top of the machine and let in the clean water. When the machine is used for the first time, take the sponge out from under the water valve, put it into the water, press it with your hand and the put it back in its original place after it absorbs enough water. Open the water valve and let the water drip at 80-100 drops a minute. Then turn on the switch. The machine is ready to be used. If Model W grinding wheel is chosen, the right side will be rough ground ,and the left side fine ground. When Model WV grinding wheel is chosen the result with be the same, but there is also a V-shaped slot to refine the lens After the machine is used for a period of time, take the lower water can out and clean it in case the draining hole should be blocked. When the grinding wheel has been used for a period of time, grinding fatigue will appear (failing to grind in). In this case, use the oilstone stick to recondition the wheel. While this is being done, open the water valve The reversible button on the left side of the machine is a backward or forward adjustor (not used often). When it is required to run in normal direction or opposite direction, the chief power switch should be turned off or machine will be damaged. Parameters Grinding wheel material Diamond grinding wheel Rotating speed 5500-6000r/min Grinding wheel specification 3.5cm/1.37" Net weight 4kg/2.2lbs Grinding wheel size 280#:0.74",180#:0.62" Package Size 34*22*22cm/13.3"*8.6"*8.6" Notice The drain hose for new machines is placed in the sink at the bottom of the machine. When using it for the first time, please pull out the sink, take out the hose and connect it to the drain. Detail Display No.1 Double stand support Higher stability No.2 Diamond grinding wheel 280# fine grinding, 180# coarse grinding ? No.3 Detachable sink Easier to change water ? No.4 Adjustable water output Adjustable according to different materials ? Item Number: 153134 You can make order with no worries. Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends public holidays. Warranty: 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.