Here is where sellers can list any catch-all policies about their booth. If any of this information is essential to the buying process, the seller will also mention that within their item description -- so don't sweat it if you don't make a habit of looking at the details for every booth!

Miscellaneous details

Application of ARTWORK Instructions:

Trimming on artwork vinyl will be required Artwork is shipped on rolled Vinyl and laminate. Make sure you have scissors and sharp utility knife, with new blade.

- Ensure the surface is smooth and dust free.
-be aware of how vinyl is made, there is a thin plastic clear film, which once removed from the back, will reveal an adhesive sticky side of the artwork.
-You can use painters tape to hold the art where you want it. (If your using the acrylic, place the whole sheet/or wood panel on top of artwork so you can see where it needs to be positioned for optimal position of artwork.
-peeled the backing half way off and worked it on with a rubber squeegee, or similiar paint scraper / piece of wood / almost anything wrapped well in cloth but with a straight edge so nothing solid protrudes, press to apply the sticker from roughly the middle to the outside.
-Then take a very sharp crafting knife and went along the edges to get the art even with the edges, (cutting will need to be done to get a flush installation of artwork to the sides if T-molding is not to be applied. Not the case for Atgames ALU.
-First timers arcade cabinet decals installation slow and easy wins the race apply the different pieces to work on the cabinet, Cut out button holes/joysticks, etc.
Trackball and Spinners take up space on Control panel, very difficult to adjust artwork pictures for design impact and aesthetics, so holes may need to be cut over art.

Seller badges