Green Type 2 Reflective Tape

SUPER-ENGINEER GRADE REFLECTIVE TAPE (SEG) is 60% to 100% brighter than regular engineering grade reflective tape.  Great for smooth flat or smooth round surfaces like a pipes, bollards, and bar gates.  SEG is a Type II retro-reflective adhesive tape that is approximately 5.5 mil and has a permanent acrylic adhesive with a peel-off backing.  It utilizes embedded microscopic glass beadlets to reflect light and is commonly used for reflective striping or markings on vehicles, bicycles, wheel chairs, bollards, & stock gates.  It meets ASTM specifications D 4956 and LS-300C is resistant to weathering and fading and has a 12-year minimum longevity. 

On vehicles, it is best applied using a soapy water solution (or Windex) and a squeegee.  For best results, the adhesive should be allowed to cure for about 48 hours. 

This is a Nikkalite product and is stamped with a stat watermark to show that it is super engineer grade and not regular engineer grade (which is not nearly as bright).

Sold in 1, 2, and 4 inch widths. 10, 20, or 30 foot lengths.

• ASTM D4956 Type 2 Reflective Tape.
• Single layer design meaning it will not delaminate like other reflective tapes.
• Rated for a 12 year outdoor life.
• Visible for thousands of feet away versus hundreds with standard reflective tapes.
• Very aggressive adhesive.  Peel, stick and press on with a soft cloth. (Clean dry smooth surface)
• Used to mark emergency vehicles, fire trucks, ambulances, helmets, loading dock areas, bollards, poles, dumpsters, gates, barricades, tractor trailers, and more.