Fitment for years 2004-2014
1 KIT IS FOR THE ENTIRE BIKE. --- Replaces
air pumps, air valves, and associated hoses with 2 or 4 small aluminum plates,
made 6061 Aircraft grade Aluminum.
Benefits
-
Lower EGT's out (exhaust gas temperatures)
Kit
Includes
- Aluminum Block Off Plates
Specific to your Bike
- Lock Washers
- Step by step instructions with
photos.
- Installation Support - If you
need assistance with installation or have a question we are there for you.
We can also send instructions in any language, just request it.
AIS Defined
The manufacturer uses clean air injection that adds oxygen to the
exhaust. For this to work correctly, the
entire system must remain stock, meaning no intake or exhaust modifications or
aftermarket parts. Once changes have been made, the system is no longer in an
equilibrium, so it often leads to "backfiring". Possible
backfire could damage the exhaust
system of the bike. By removing the entire system, and replacing
with plates, one can nearly eliminate all backfiring, even if no modifications
have been made. Also, since the clear
air injection is adding extra air from the air box you can gain some increase
in air box pressure when at speed. With
the clean air system in place, any air/fuel sensors on the bike will show a
leaner running engine causing your bike to adjust the fuel system too
rich. This can only be prevented by
eliminating the clean air system (AIS) and all associated hoses. This also
cleans up the look of the bike and removes a significant amount of weight.
Installation
The kit comes with complete instructions for
installation. It is easy, just take it slow and pay attention. It is a straight
forward process, and we offer full support, instructions. Only basic hand tools
are required.
Fair
and Honest Guarantee
Our goal is to
provide a quality upgrade for your bike at a reasonable cost. If you
receive your kit and have questions please contact us and we will do what it
takes to ensure your satisfaction. We have worked to keep our overhead
low and are able to pass along those savings to our customers, hence the price
differences.
FAQ'S
Q: Is this kit for all (1,2,3,4,6) valves on my bike?
A: Yes, 1 Kit is for all the valves on the bike. You only need to
order 1 Kit for your bike.
Q: Do you ship international, and how much?
A: Yes, we ship worldwide, for $18.42.
Q: What size plates come in this kit?
A: Each kit is different, based on the bike, modifications, and operating
altitude, so jet sizes vary.
Q: Do I need an AIS Block Off
Kit?
A: If you have made any modifications, or want reduce backfiring, remove
weight, Clean up the engine clutter,
then yes you do need a kit.
Q: Can I install this kit?
A: Yes, you can install it, don't
be intimidated if you've never done this before, only very basic skills are
needed, and it has instructions with full support.
Q: How long does it take to install?
A: Time varies, but it is directly related to the # of valves on your bike.
Allow at least 1/2 hour per valve.