MIG Aluminum Welding Wire - 1 Lb X 0.035" (4 SPOOLS)
Specification
| Item model number | 5356W4x35 |
| Part Number | 5356W4x35 |
| Batteries Required? | No |
| Item Package Quantity | 1 |
| Material | Aluminum |
| Item Weight | 4 pounds |
| Batteries Included? | No |
| Size | 0.035" - (4 Spools) |
| Package Dimensions | 8.15 x 4.65 x 4.37 inches |
| Manufacturer | TGB |
4.65 inches x 8.15 inches x 4.37 inches. Weight: 4.0 lb
Item Description
- ER5356, commonly referred to as “AlMg5,” is a 5% magnesium aluminum wire used for welding base metals 5050, 5052, 5083, 5356, 5454 and 5457
- This MIG wire has become the most widely used aluminum welding wire because of its compatibility with so many different base metals and better corrosion resistance in salt water
- Weld deposits have good ductility and higher tensile strength although it is not suitable for temperatures sustained above 150°F (65°C)
- Melting range is 1060°F – 1175°F, density is 0.096 lbs/in3 and post anodizing color is white
- 1 Lb of wire per Spool - Available diameters: 0.030", 0.035" and 0.045" - Available Spool Quantities 1, 2, 4 and 6-Pack. Select your choice from the menu.
ER5356 - WIRE - MIG (GMAW) – ALUMINUM AWS A5.10 Welding Positions: All, except vertical down INTRODUCTION: This is one of the most commonly used aluminum welding alloy. It is a general purpose filler alloy for welding 5XXX series alloys with 5% magnesium for high strength, extremely resistant to corrosion and resistant to sea water. Suitable for subsequent anodization. USES: Materials: AlMg3, AlMg4,5, AlMg5, AlMgSi1, G-AlMg3, G-AlMg3. Automotive bumpers and supports, structural frames in the shipbuilding industry, formed truck panels, railing industry, power industry, trailer manufacturing. CHEMICAL COMPOSITION (%): Chemical Composition Al Si Fe Cu Mn Requirement Balance ?0.25 ?0.4 ?0.1 0.05-0.2 Typical test result Balance 0.06 0.10 0.03 0.11 Chemical Composition Mg Zn Ti Be Cr Requirement 4.5-5.5 ?0.1 ?0.06-0.2 ?0.0003 0.05-0.2 Typical test result 4.85 0.002 0.15 0.0002 0.09 WELDING PARAMETERS (DC+): Diameter WFS (ipm) Amps Volts (lb/100 ft) Argon (cfh) 0.030” 480-626 60-175 15-24 0.65-1.25 25-30 0.035” 450-750 70-185 15-27 1.0-4.25 30-35 0.045” 330-500 125-260 20-29 1.0-4.25 35-45 1/16” 250-450 170-300 24-30 3.8-6.6 45-75 Shielding Gas: 100% Argon, Argon / Helium Mixtures The above parameters are for reference purpose and depend on diverse factors. Run tests, evaluate and set your welding parameters before starting the welding job.
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.