Suitable models:
For Volvo V50 V60 V70 2004~2012
For Volvo XC60 2009~2015
For Volvo XC90 2003~2014
For Volvo S40 S40L V50 2004~2012
For Volvo S60 S60L XC60 2009~2015
For Volvo S80 II S80L 2006~2016
For Volvo C70 V70 XC 70 XC70 2008~2015
For Volvo XC90 S80 S80L S60 S60L S40 S40L C70 2004~2020
Notice:
1. The products in the store are dedicated to special vehicles. The model and year on the title and picture are
for reference only.
2. The picture of the position of the license plate light in the trunk needs to be sent to the customer service for verification to ensure that it is 100% suitable for use.
High quality image sensing Increase the photosensitive area, Clear imaging
① Connect the input plug of the navigation video cable
② Connect to the navigation reversing detection line (Back or Reverse)
③and ④butt, and then connect the positive pole of the reversing light
⑤ Connect the body screw to the ground or the negative pole of the reversing light
①The positive pole is connected to the reversing light+
②The negative pole is connected to the reversing light-
Blue light:
①Connect the tail light power supply+
②Connect the taillight power supply -
Red light:
①Connect to ACC power+
②Connect to ACC power-
It can solve the phenomenon of installing the rear view splash screen when reversing.
Image sensor: CCD
Chip: Sony HD chip
TV system: NTSC / PAL
Effective pixels: 1280*1080P
Screen display: mirror image with ruler line
Product lens: 6-wave full-wave lens
Viewing angle: 140°
Waterproof: IP68
Power supply: DC 12V
Current: DC12V >= 80mA
Operating temperature: - 30 ℃ to +80 ℃
Screen: suitable for original car screen or Android navigation screen
Video output: RCA lotus plug, lotus (AV) interface, image default image with ruler
Requirements for use: use voltage 12V, do not support 24V cars, do not support the use of high-power transformers