Item description for Dash Cam Acc Hardwire Kit Micro USB Hardwire Dashcam Kit Step Down Cable 12V 24V

[Wide applications]: MEIRIYFA Mirco USB hardware kit step-down cable is applicable to almost all GPS navigators, tachographs, electronic dogs, etc. Its input range is 12~24V, output voltage is 5V, output current is 3A, and it has mirco usb input power port, which makes charging easier.
[High safety standard]: The Mirco USB hardware kit cable can convert the vehicle's 12V to 24V voltage to 5V voltage, thus supporting longer parking monitoring or delayed photography operations. The built-in protection device can prevent the equipment from overcurrent and overheating.
[Low voltage protection]: It has battery voltage autoic detection and low voltage protection functions. When the voltage is lower than 11.6V or 23.6V, the power output can be cut off autoically. It is compatible with large and small cars to ensure that the car can start normally.
[ACC step-down line]: automobile positive pole (BAT+yellow line), automobile negative pole (GNT black line), automobile ACC (ACC red line). When the vehicle engine is turned off, the dash cam will autoically switch to the parking mode. When the vehicle engine is switched on, the trip camera will switch to normal recording.
[24-hour monitoring]: Connect the power supply of the fuse box with the hardwire kit of the DASH CAM. The DASH CAM can continue to supply power to the on-board camera after the vehicle is shut down, making 24-hour parking monitoring more convenient.

Dash Cam Acc Hardwire Kit Micro USB Hardwire Dashcam Kit Step Down Cable 12V 24V