YOU ARE PURCHASING A NEW MOOSE RACING RIGHT SIDE RACK AND PINION TIE ROD END KIT. THIS WILL FIT THE 2016-2017 Can-Am Maverick 1000 Turbo AND THE OTHER MODELS LISTED IN THE COMPATIBILITY CHART.

Moose Rack and Pinion End Kit - Right Hand Side - 0430-0748

UTV steering rack rod ends will save your customer hundreds of dollars of the cost of a complete steering rack assembly

The inner rod assemblies have increased shaft diameters to improve their strength; each Kit includes heavy-duty inner and outer rod ends with replacement boot, clamps and any required lock washers; outer tie rod ends are also available individually

Tie Rod End Kit Right, Inner and outer - contains both tie rod end and shaft that connects to the steering rack as well as the outer tie rod end; kit also contains a boot and required hardware for the right (passenger) side

Included Items:

(1) 14mm-1.50 right hand thread tie rod end

(1) 14mm-1.50 hex nut

(1) 12mm-1.75 x 90mm hex head bolt

(1) 12mm-1.75 nyloc nut

(2) 12mm ID x 25mm OD flat washers

(1) 12mm ID x 32mm OD flat washer

(1) 16mm-1.50/14mm-1.50 right hand thread rack end

(1) 14mm-1.50 x 310mm internal right hand thread tie rod

(1) Black rubber boot

(2) 7 1/2 in. black plastic cable ties

Instructions