110V/220V 50Amp Non-Pilot Arc Plasma Cutter, Dual Voltage with Pre-Attached 110V US Plug + 220V L6-30P Plug, 1/2 Inch Cut, Blue
Specification
Item model number | 698056928098 |
Brand | Biltek |
Manufacturer Part Number | BIL50+P220V |
Item Weight | 16 pounds |
Model | BIL50+P220V |
Package Dimensions | 18.5 x 12.99 x 10.24 inches |
Manufacturer | KapscoMoto |
12.99 inches x 18.5 inches x 10.24 inches. Weight: 16.0 lb
Item Description
- Plasma Cutter 50AMP DC Inverter Dual Voltage 110V/220V with Attached 110V US Plug + 220V Plug
- Cut Up to 1/2" Thick Steel with the High Performance Cutting Torch
- Torch Design Provides a Sure, Comfortable Grip Made from Heat and Impact Resistant Material
- High Cutting Performance Due to the Advanced Inverter Technology
- Input Voltage: 110-220V, 1-PH, 50/60Hz Dual Voltage
NEW Plasma Cutter 50AMP DC Inverter Dual Voltage 110V/220V. The plasma cutter was beautifully designed to cut stainless steel, alloy steel, mild steel, sheet metal, copper aluminum as well as other metal materials.
***Features:***
-Plasma Cutter 50AMP DC Inverter Dual Voltage 110V/220V with Attached 110V US Plug + 220V Plug
-Torch Design Provides a Sure, Comfortable Grip Made from Heat and Impact Resistant Material
- Cut Up to 1/2" Inch Thick Steel with the High Performance Cutting Torch
-Non-Pilot Arc Torch Provides a Longer Life for Consumables
-High Cutting Performance Due to the Advanced Inverter Technology
***Specifications:***
-Input Current: 20-40A
-Output Current: 15-50A
-Input Voltage: 110-220V, 1-PH, 50/60Hz Dual Voltage
-Cut Thickness:
-8mm Thick Steel (Optimal Cut)
-10mm Thick Steel (Maximum Cut)
-12mm Steel (Severance Cut)
-Air Supply: Clean, Dry, Oil-Free Air
-Required Air Flow Rate: 0.6-0.75Mpa 3.0scfm @ 70PSI
-Duty Cycle: 35% @ 40°(104°)
-Color: Blue
-Material: Stainless Steel, Mild Steel, Aluminum, etc.
-Brand: Biltek
-Condition: 100% Brand New
Important Please Read: You will need to have your own air supply from an air compressor. Plasma cutter includes a standard US 110V plug, to reach the 50A cut specs you will need to connect a 220V plug.
***Package Includes:***
-1x Plasma Cutter Power Supply
-1x Cutting Torch
-1x 30A 250V NEMA L6-30P Plug
-6x Replacement Consumables:
-2x Nozzle Tips
-2x Electrodes
-1x Ceramic Cup
-1x Ceramic Ring
-1x Ground Clamp
-1x Air Filter/Regulator
-1x Air Hose
-4x Hose Clamp
-2x Air Connectors
-1x User Manual
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.