SPECIAL LIMITED TIME OFFER!!!

FREE SHIPPING!!!

YOU SAVE $20!!!

 

 

Are you ready to smoke the ball? 

The XPII MAXSPEED IRON SET is finally HERE!  

Compares to "expensive name brand golf clubs that we cannot mention"

 

GREAT NEW GOLF CLUBS FOR THE BEGINNING TO ADVANCE GOLFER!!WITH A RETAIL VALUE OF $599.99

 

BUY IT TODAY!

 

SPECIAL Limited Time OFFER!

 

8 CUSTOM GOLF CLUBS for a FRACTION of the cost of name brand golf clubs!!!

 

The XPII MAXSPEED irons are EXTREMELY FORGIVING OVERSIZE perimeter weighted irons designed to improve iron  play FOR GOLFERS OF  ALL SKILL LEVELS. The XPII MAXSPEED iron set has a generous cavity chamber increasing consistency and accuracy.  Made from high strength stainless steel the XPII MAXSPEED iron  may be custom fit for all heights. DON'T MISS-OUT on this limited  time promotional offer as these irons will not be available for long at  this price.

 

CONDITION RATING:  10  (BRAND NEW)

 

 

You will receive a complete Custom assembled set  of XPII MAXSPEED TECHNOLOGY Irons with 3 Easy Steps.

 

_{^{-STEP 1-}}

Choose your 8 clubs (Select 1 option):  

-(3-4-5-6-7-8-9-PW)

-(4-5-6-7-8-9-PW-SW)

• XPII MAXSPEED TECHNOLOGY Irons will be Custom Fit for you with Tour Velvet  grips and Precision steel shafts

 

-STEP 2-

Choose YOUR custom club length: 

                                   

Club     Length

 

Determining     wrist-to-floor measurement

     

To     determine your wrist-to-floor measurement wear non golf shoes
and  stand on a     hard surface with your arms hanging relaxed at your
sides. Then  have someone     measure from the point where your hand
meets your wrist (as  shown in the     diagram below) to the floor.
With this measurement and your  height, we will     be able to determine
the correct club length for you.

                                            

 

 

 

The                            chart below helps you determine if you should  have your                            clubs
altered from the standard size based  on your                         height                            and wrist-to-floor                         
measurement.

                         

Note:                            Club length alterations given are in inches.  For example,                            +1.75"
means that your clubs should be  made to                            be 1.75" longer than standard
length. A  -0.5"                            instructs us to build your clubs to be 0.5"  shorter                            than
standard length. And a S means that  the proper                            club length for you is
Standard. Use the  Chart to determine                            how much longer or shorter
(than standard)  your club                            length should be by finding where Your Height
and  Wrist-to-Floor                            Measurements intersect:

 

                                   

Shaft           Flex

Shaft                         flex, a measurement of how much a shaft will  bend under                         a certain load,
is directly related to  trajectory,                         distance and feel. The proper shaft flex for
your  swing                         speed helps produce the optimal trajectory for  your                         shots.
Flex Chart: Use                         the Charts below to determine the proper flex.  The                         
charts below are for consistent carry  yardages only                         (don't include roll).

            

            

                                   

Shaft Length

  Generally taller  players require longer clubs and                            shorter players
require shorter clubs. In  metal woods                            your skill level will dictate
the need for  additional                            length. A shorter driver may increase
distance  for a                            player who has difficulty making solid  contact. Putter                           
length is based on a golfer's posture and  hand position                            at
address. Use the chart below to  determine the proper                            shaft length.

  

                                   

Grip Size

                            Grip size plays a significant role                            in the shape of every golfer's
shot. Use  the chart below                            to determine the proper grip size
for the  clubs. Too                            large a grip can limit the golfer's ability to 
properly                            release the wrists through the impact area (
resulting                             in a block and/or fade), while too small a  grip
can                            cause an early release (resulting in a pull  and/or draw).

          

                           

-STEP 3-

Please include with your PayPal payment your  iron choice, flex choice, height and wrist to floor measurement & grip size.

For  example:

Please send club specs:

Right handed;

Regular  Flex; 

4-SW;

my height is 5'8"

33"  wrist to floor measurements.

Standard size grips

& our club builders will take care of the rest!!!

 

.  . at   ..!

                       

Our highly trained customer support team is ready to assist you!  The             new XPII MAXSPEED TECHNOLOGY Irons are  designed with             the mid to high handicapper in mind.  These irons offer longer distance and greater control.  The XPII MAXSPEED TECHNOLOGY irons have a generous cavity chamber increasing consistency and accuracy. 

ADDED BONUS THIS WEEK!!!

FREE SPINE ALIGNMENT FOR YOUR ENTIRE CUSTOM SET!!!

How  Much Does It Cost? 

Answer:   FREE WITH YOUR  ORDER!!!

What is  Spine Alignment?

Answer:  An independent study on spine aligning was undertaken by Golf Science Consultants, Inc. The study was performed by J. Howard Butler, President of Golf Science Consultants, Inc., and former vice-president of shaft technology at True Temper.

Preliminary test results clearly indicate that when the golf shaft is properly aligned the club becomes more stable, thus improving the impact repeatability (hitting the sweet spot more often).

In all golfers tested impact repeatability improved from 14 to 51% when changing from non-aligned to spine aligned clubs. In a separate article, Golf Digest reported on tests conducted by Dr. P. C. Chou of the Drexel University Ballistics Research Center, which revealed that a player loses about six yards for ever two-tenths 2/10 of an inch that they miss the sweet spot.

Nearly 240 Tour pros have spine aligned their clubs. "I believe there's something to spine-matching," says Ben Crenshaw. Want real life results? Check out Scott Verplank's record on the Tour through 1998, then look at his record in 1999 and 2000. He has his shafts aligned in 1999. "The bottom line ...is that if the spines are not set in the club heads at the proper angle in relation to the clubface, we are not getting the most out of our clubs and we will continue to have clubs that will perform differently than others. Did spining my clubs make a difference? It sure did. I'm hitting my 8-iron, 9-iron and wedge farther. I also noticed that I hit my woods straighter, and I don't hate my 6-iron anymore." Tom Stine, PGA Tour Partners Magazine, Sept/Oct

SKILL LEVEL CLASSIFICATION:

HANDICAP CLASS RANKING:  7-35HC

SPECIFICATIONS

- PRECISION STEEL SHAFTS -

Precision steel shafts have an extremely forgiving mid kick point and weighs only 130 grams. All of our iron sets are assembled with high quality Precision STEEL shafts, manufactured exclusively by Royal Precision.  With a dedicated commitment to improve golfers’ enjoyment and playability through technology and innovation, Royal Precision has earned the trust of golfers and golf equipment companies around the world.

For more than 80 years, many of golf’s greatest players have turned to Royal Precision for high-performance steel shafts. As America’s leading premium steel shaft manufacturer, Royal Precision possesses a unique heritage in golf. Royal Precision products have won every major U.S. championship, every major on the Senior and LPGA Tours, multiple Vardon Trophies, Player of the Year titles on every tour, and nine of the last 10 Orders of Merit.

Some of the world’s best-selling golf clubs have featured Royal Precision shafts. Through cutting-edge engineering and decades of proven performance, Royal Precision has forged a long-standing reputation for innovations that make a winning difference.

The Grip

The Men's Professional TOUR VELVET GRIP incorporates a slightly firmer feel that better players desire in their clubs. It’s a great design for all conditions and playing ability.

GOLF STORE USE: 

DESCRIPTION:  XPII MAXSPEED TECHNOLOGY IRON SET 8 CLUBS

RIGHT/LEFT HANDED:  RIGHT HANDED

GRIP:  TOUR VELVET GRIPS

GRIP SIZE:   CUSTOM__________

SHAFT TYPE:   PRECISION STEEL SHAFTS