Thermoforming Mouth Trays
Plastic heat forming reusable mouth tray.
This easy to use trays is mainly used for at home teeth whitening treatments.
Trays become moldable after being exposed to hot water.
2 trays required per person (1 upper and 1 lower arch).
HEAT SEALED FOR YOUR PROTECTION!
This product is going in your mouth!
DO NOT accept an unsealed product.
EASY TO USE
10 Pieces of Thermo forming trays
Step 1: Place the tray over the upper
teeth without placing the tray in boiling water. Practice with your
tongue on the roof of your mouth and touching the inside of the tray.
Suck the air from the tray. This contours the guard to the inside
surface of the teeth. When finished repeat with the lower tray.
Step 2:
Bring water to a boil. The bowl should be at least 4" deep to ensure the
tray's full immersion. Remove the container from the heat and place one
tray in the hot but not boiling water. Leave the tray in water for 5
seconds. Make sure the edges do not fold onto each other.
Step 3: Lift
the tray vertically from the water using the tab. Carefully and quickly
place the tray around the teeth and then immediately perform the
procedure outlined in step 1.
Step 4: Once you are satisfied with the fit, trim the front tab away from the tray with scissors. Make sure it is flush with the front surface of the tray.
