Long Range (900 metre) Warehouse Special Wireless 'S' Entry Bell System supplied with a Heavy Duty Push Button (with please ring etched onto it) and a Loud Wireless Bell.


Popular in many applications including:

  • Warehouses.
  • Schools.
  • Factories.
  • Farms & Rural Businesses.
  • Large Homes.
  • External Home Offices.
  • Workshops.


The transmission range between the Battery powered Wireless Transmitter and plug in Wireless Bell is an impressive 900 metres (line of sight), which equates to around 400 - 600 metre in most applications, this can be at least doubled by adding a Signal Repeater (004-2910).


How it Works:

The Heavy Duty Push Button (with 'Please Ring' etched onto it) is connected to a Long Range Battery Transmitter (fitted inside a easy to mount weatherproof box) by 3 metres of bell cable (which can be shortened or lengthen upon request).

The Push Button would be mounted onto the most appropriate location and the transmitter box would be located into the lost suitable location for wireless transmission (this could be simply on the back of a post or just inside a factory wall).

The Wireless 85 Decibel Bell is powered by a plug in Transformer and is fully weatherproof, therefore can be fitted inside the Warehouse or in the Yard. 

When the Push Button is pressed, the Wireless Bell will operate from 10 - 60 seconds or 5 minutes (adjustable).


Installation Guide:

These Bell Systems are very Easy to Install, the basic process would be:

  1. Mount the H/D Push Button.
  2. Mount the Battery Transmitter & Box (4 x Screws).
  3. You may need to Remove the Cable between the Push Button & Transmitter Box to guide it through a hole in a Wall or Post.
  4. Mount the Plug in Wireless Bell & Connect the 3-pin Plug into a Wall Socket.


Additional Accessories:

Many different accessories can be added to this Warehouse Bell System to suit most commercial applications, these include:

  • Additional Push Buttons & Transmitters.
  • Simple Handheld or Wall Mounted Internal Push Buttons.
  • Additional Receivers.
  • Additional Bells.
  • Loud Wired Sirens.
  • Wired Buzzers.
  • Wired Adjustable Sirens.
  • Flashing LED's.
  • Signal Repeaters.


These Wireless Bell System could also be used for other uses including:

  • Staff Call Systems.
  • Staff Panic Alarms.
  • Intruder Alerts.


Please Contact Us for Friendly, No Obligation Advice !!


Very Easy & Quick to Install !!


Kit Includes:
  • 1 x H/D Push Button.
  • 1 x S Transmitter & Mounting Box.
  • 1 x Plug in Wireless 85 Decibel Bell.
  • 1 x 3-pin Plug in Transformer (2-pin available upon request).

Specification:


Wireless Bell Receiver:

  • Power Supply: 3-pin Plug in Transformer (2-pin available upon request).
  • Power Supply Input: 12v DC (1 amp).
  • External: Yes.
  • Size: 150 mm Diameter x 60 mm Deep.
  • Mounting Bracket: 4 x Holes.
  • Volume: Approx 85 Db.
  • Bell Duration: 10 seconds (can be changed to 1 - 60 seconds or 10 minutes).

Wireless Transmitter:

  • Wireless Range: 900 metres (line of sight).
  • Power Supply: 1 x MN21 12v Battery.
  • Push Buttons: One.
  • Frequency: 433 Mhz.
  • Size: 90 x 40 x 15mm.
  • Colour: White, Grey & Red Button.
  • Optional Cable Connection: Yes.

Transmitter Mounting Box:

  • Material: Plastic.
  • Weatherproof: IP65.
  • External Size: 195 (L) x 90 (W) x 45 (D) mm.
  • Internal Size: 133 (L) x 83 (W) x 35 (D) mm.


Bell Specification:

  • Power Supply: 12v DC.
  • External: Yes.
  • Size: 150 mm Diameter x 60 mm Deep.
  • Mounting Bracket: 4 x Holes.
  • Volume: Approx 85 Decibel.


Push Button Specification:

  • Size: 85mm (L) x 40mm (W) x 40mm (D)
  • Contact Type: NO or NC.
  • Sealed Wired Contacts.
  • Words: Please Ring.

Ultra Secure Direct are a UK based company specializing in Security & Safety products. All products are despatched from our Northampton warehouses, technical support is also offered from the same location.