Copper CX4 10 Gigabit Ethernet Technical Specifications – (10GBASE-CX4) Adapters: |
IEEE Standard / Network topology: |
Copper 10 Gigabit Ethernet, 10GBase-CX4 |
Data Transfer Rate: |
3.125GBd per one lane, X4 transmit, X4 receive |
Cables and Operating distance: (Up to) |
CX4 Cable: Up to 15m |
Operating Systems Support |
Operating system support: |
Windows Linux Netware Unix Solaris |
General Technical Specifications |
Interface Standard: |
PCI-Express Base Specification Revision 1.1 |
Board Size: |
Low profile short add-in card: 167.64mm X 68.91mm (6.6”X 2.713”) |
PCI Express Card Type: |
X8 Lane |
PCI Express Voltage: |
+3.3V +-9%, +12V +- 8% |
PCI Connector: |
X8 Lane |
Controller: |
Broadcom: BCM57710 |
Holder: |
Metal Bracket Full Height and low profile |
Weight: |
100 gr (3.527oz) |
Power Consumption: |
7.08W, 0.59A at 12V and 0.066W, 0.02 at 3.3V: Typical all ports operate at 10Gbit/s. 6.12W, 0.51A at 12V and 0.066W, 0.02 at 3.3V: Typical No link at all ports. |
Operating Humidity: |
0%–90%, non-condensing |
Operating Temperature: |
0°C – 50°C (32°F – 122°F) |
Storage: |
-20°C–65°C (-4°F–149°F) |
EMC Certifications: |
FCC Part 15, Subpart B Class B Conducted Emissions Radiated Emissions CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003 Conducted Emissions Radiated Emissions CE EN 55024: 1998 Amendments A1: 2000; A2: 2003 Immunity for ITE Amendment A1: 2001 CE EN 61000-3-2 2000, Class A Harmonic Current Emissions CE EN 61000 3-3 1995, Amendment A1: 2001 Voltage Fluctuations and Flicker CE IEC 6100-4-2: 1995 ESD Air Discharge 8kV. Contact Discharge 4kV CE IEC 6100-4-3:1995 Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz CE IEC 6100-4-4:1995 EFT/B: Immunity to electrical fast transients 1kV Power Leads, 0.5Kv Signals Leads CE IEC 6100-4-5:1995 Immunity to conductive surges COM Mode; 2kV, Dif. Mode 1kV CE IEC 6100-4-6:1996 Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M.By 1kHz CE IEC 6100-4-11:1994 Voltage Dips and Short Interruptions V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per |
LEDs |
LEDs: |
(1) LED per port Link / Act : Turns on link, blinks on activity (green) |
LEDs location: |
LEDs are located on the PCB, visible via holes in the metal bracket holder |
Connectors: |
CX4 |