Extra Long Range (1800 metre) Wireless 'S' Alert System supplied with a Heavy Duty Push Button (with please ring etched onto it) and a Receiver with a Built in Chime or Buzzer (with adjustable volume).


Supplied with a Signal Repeater that doubles the Wireless Range of the Wireless Transmitter to the Receiver !!


Popular in many commercial applications including:

  • Warehouses.
  • Schools.
  • Factories.
  • Farms & Rural Businesses.
  • Large Homes.
  • External Home Offices.
  • Workshops.

The transmission range between the Battery powered Wireless Transmitter and plug in Signal Repeater is an impressive 900 metres (line of sight), which equates to around 400 - 600 metre in most applications, the transmission range from the Repeater to the Wireless Receiver is another 900 metres (line of sight), this can be increased further by adding one or more Signal Repeaters (004-2910).

How it Works:

The Heavy Duty Push Button (with 'Please Ring' etched onto it) is connected to a Long Range Battery Transmitter (fitted inside a easy to mount weatherproof box) by 3 metres of bell cable (which can be shortened or lengthen upon request).

The Push Button would be mounted onto the most appropriate location and the transmitter box would be located into the lost suitable location for wireless transmission (this could be simply on the back of a post or just inside a factory wall).

The Signal Repeater is normally located approximately halfway between the Transmitter & Receiver and is powered by a simple 3-pin Plug in Transformer.

The Receiver is powered by a plug in Transformer and has a built in chime or buzzer (with adjustable volume from zero to 85 decibel) and simple ON/OFF Button. The Receiver also has an optional 12v output and dry relay outputs which can be used to operate Sirens, Buzzers & Flashing LED's.

When the system is not required, you simple turn the Internal Receiver OFF.


Installation Guide:

These Bell Systems are very Easy to Install, the basic process would be:

  1. Mount the H/D Push Button.
  2. Mount the Battery Transmitter & Box (4 x Screws).
  3. You may need to Remove the Cable between the Push Button & Transmitter Box to guide it through a hole in a Wall or Post (the cable can be lengthened or shortened to suit the application).
  4. Mount the Plug in Repeater & Connect the 3-pin Plug into a Wall Socket.
  5. Mount the Plug in Receiver & Connect the 3-pin Plug into a Wall Socket.


Additional Accessories:

Many different accessories can be added to this Warehouse Bell System to suit most commercial applications, these include:

  • Additional Push Buttons & Transmitters.
  • Simple Handheld or Wall Mounted Internal Push Buttons.
  • Additional Receivers.
  • Additional Bells.
  • Loud Wired Sirens.
  • Wired Buzzers.
  • Wired Adjustable Sirens.
  • Flashing LED's.
  • Signal Repeaters.


These Wireless Bell System could also be used for other uses including:

  • Staff Call Systems.
  • Staff Panic Alarms.
  • Intruder Alerts.


Please Contact Us for Friendly, No Obligation Advice !!


Very Easy & Quick to Install !!


Kit Includes:
  • 1 x H/D Push Button.
  • 1 x S Transmitter & Mounting Box.
  • 1 x Plug in Receiver.
  • 1 x Plug in Repeater.
  • 2 x 3-pin Plug in Transformers (2-pin available upon request). 

Specification:


Wireless Receiver:

  • Receiver Size: 160 (W) x 105 (H) x 35 (D) mm.
  • Power Supply: 15v DC 1amp (3-pin plug in transformer).
  • ON/OFF Button: Yes.
  • Adjustable Volume Control: Yes.
  • Available Channels: 4.
  • Max sets of Beams per Channel: 32.
  • Maximum sets of Detectors per Receiver: 128.
  • Output Voltage: 12v DC.
  • Output Voltage Duration: 1, 10, 60 second & 5 minutes.
  • Built in Chimes: Yes (one per channel).
  • Reminder Bleep: Yes (if programmed).
  • Exit Delay: Yes 5 minutes (if programmed).
  • Frequency: 434.6 MHz.
  • Standby Current: 20 mA.
  • Alarm Current: 180 mA.
  • Relay Rating: 24v DC or 120v AC (2 amp).
  • Wireless Working Range: 900 (line of sight).

 

Wireless Transmitter:

  • Wireless Range: 900 metres (line of sight).
  • Power Supply: 1 x MN21 12v Battery.
  • Push Buttons: One.
  • Frequency: 433 Mhz.
  • Size: 90 x 40 x 15mm.
  • Colour: White, Grey & Red Button.
  • Optional Cable Connection: Yes.

Transmitter Mounting Box:

  • Material: Plastic.
  • Weatherproof: IP65.
  • External Size: 195 (L) x 90 (W) x 45 (D) mm.
  • Internal Size: 133 (L) x 83 (W) x 35 (D) mm.


Push Button Specification:

  • Size: 85mm (L) x 40mm (W) x 40mm (D)
  • Contact Type: NO or NC.
  • Sealed Wired Contacts.
  • Words: Please Ring.


Signal Repeater:

  • Wireless Range: 900 metres (line of sight).
  • Power Supply: Plug in 3-pin Transformer (2-pin available).
  • Frequency: 433 Mhz.
  • Size: 160 (w) x 160 (h) including Aerial x 55 (d) mm.

Ultra Secure Direct are a UK based company specializing in Security & Safety products. All products are despatched from our Northampton warehouses, technical support is also offered from the same location.