This Wireless GSM Perimeter Alarm Kit is supplied with the following parts (but can also be expanded in many ways to suit different applications):
A complete Perimeter Alarm System to help you Monitor & Secure your Home & Business, ideal for DIY Installation (but can be expanded even more if required). How it Works: The 4 x sets of Beams are mounted to cover your Perimeter or vulnerable parts of your Perimeter, the Receiver & Dialler are normally located inside your Home or Office. If a person or vehicle passes through any of the Beams when the Dialler is Armed, the Internal Receiver will Chime, the Dialler will activate a built in Siren and the Wired Siren (for the pre-set durations) together with contacting Key-holders by Phone & Text. Wireless Beams:
These impressive Solar Powered Wireless Perimeter Beams (often called laser beams) are packed with impressive features listed below:
The Dual Detection Technology works by having a pair of Detectors (set 60 mm apart from each other) on each Beam, both Detectors have to be breached simultaneously to create an activation, allowing small animals, insects, leaves & debris to safely pass by. They also have an additional Charging Port which can be used to give the Beams a boost charge should you experience a lengthy duration of low sun light, or perhaps one of the beams needs to be fitted into a slightly covered location. You can also add an separate Solar Panel on any given Beam if it helps the charging or positioning options. They are very easy to install as they have a display screen and a sighting lens to help installation. You can use up to 128 sets of Beams with this Receiver & 32 sets should you decide to add a Solar Wireless Siren (part number 004-2810). Operating Range:
The Wireless operating range between the Beams & Receivers is 900 metres (line of sight) which can be doubled by using the signal repeater (part number 004-2910).
Receiver: The 4-channel Receiver would be connected to the GSM Dialler by a short length of cable (supplied), and is powered by a standard 3-pin Plug in Transformer, it has the following features:
3G KP9 GSM Auto-Dialler: The KP GSM Auto-Dialler is connected to the Wireless Receiver by a short length of bell cable (supplied) and communicates through mobile phone networks, a standard sized SIM Card needs to be fitted (not supplied but is available in the drop down above), you can use either PAYG or Contract. The Dialler can be purchased as a 2G or 3G model (please see the drop down near the add to cart button) and is packed full of features normally only associated with much more expensive systems including:
The secret to using a GSM Auto-Dialler with a Perimeter Alarm is to use the Dialler as the brains of the system, so if the Dialler is Armed the Alarm is Armed, if Disarmed the Alarm is OFF (although you can choose to use the built in chime on the wireless receiver to give a useful Alert). The Dialler can be controlled by the following methods:
GSM (2G) or 3G: There are two options for this Dialler GSM (or 2G) & 3G which can be selected in the drop down near the add to cart button, the differences are:
Siren: This Perimeter Alarm is supplied with a very loud 118 decibel 6-tone Siren and 3 metres of Cable (which can be easily extended), the Siren is connected into the KP9 GSM Dialler, and would only work if the Dialler is Armed. The GSM Control Panel can also in different ways helping you a return on the investment, examples below:
You can add many additional accessories to this Perimeter Alarm system to suit your application including:
*You can use up to 128 sets of Wireless Detectors with this single Alarm System* If you require advice when building your system, please contact us for Friendly, No Obligation Advice !! Kit Includes:
Specification: Wireless Receiver Specification:
|