The difference between ShowerBlaster® brand products and copycats, that even copy my photos, model names, and brand name to confuse the buyers, is that we put in writing in the description that we bore our over 10.5 gpm models to 17/32" inner diameter and in addition, we open up internal sections (not just the balljoint) to allow all that water to flow into the cavity of the showerhead and out the output ports. Nobody else describes that procedure because they don't do it! Only with these 2 modifications can you get the full water flow that's described for the model you are buying. After all we have been doing this, and only this, for almost 20 years!

CURVED FACE ALLOWS LARGER COVERAGE!
*NEW SUPER POWERFUL 2.5 with restrictor on or OVER 10.5GPM (40LPM) without restrictor based on testing pressure of US ASCII code*.

 

WIDE AREA COVERAGE HIGH PRESSURE SHOWERHEAD BY SHOWERBLASTER®!

THE WORLD'S #1 TOP SELLING HIGH PRESSURE SHOWERHEAD!

PROVEN WITH OVER 8000 SOLD!
ABSOLUTELY NOBODY MAKES A SHOWERHEAD THAT EVEN GETS CLOSE TO THE PRESSURE OF THIS SHOWER HEAD AT OUR SALES PRICE!
 

* ShowerBlaster (Shower Blaster) is a registered trademark ® *

h1 align="center">

 

SEE OTHER MODELS (CLICK "SEE OTHER ITEMS" ON TOP RIGHT OF PAGE IN SELLER INFORMATION SECTION)


 

 

This model appears to be the same as the one sold by our competitor.

However, this model has been  double modified, which our competitors don't do in the neck and in the inside part that distributes the water coming through the neck. See pictures above! That's why they don't show inside pictures of their product's components. We know that our model delivers a strong sharp GREATER THAN 10.5 GPM FLOW if you have normal water pressure!**

The neck is bored through to 17/32" and has also other internal part modified to allow over 10.5 GPM! Copycats don't offer this.

 

(SEE GALLERY PICTURES)

 

(WHEN EASILY REMOVING THE WATER FLOW RESTRICTOR. INSTRUCTIONS INCLUDED.)

 

This model has a face diameter of 2 1/2 inches which provides a better coverage area.

As with all of our shower heads, it can be adjusted to point 30 degrees in any direction.

This showerhead is made of a special ABS plastic. The same used on 99% of all showerheads worldwide.
ABS shower heads exhibit the following benefits over metal showerheads:

Chemical / corrosion resistance: Water and Chemical cleaners will always corrode metals over time.

You wont encounter this problem with our ShowerBlaster showerheads!

Design flexibility: Opportunities for parts consolidation. (Moving parts work better.)
Lower finished part cost. Inherent lubricity: There is less friction between ABS parts than with metal.

Color matching possibility. No tarnishing as with metal.
High strength-to-weight ratio

To:showerblaster_high_pressure_showerheads
Sent:Jan-31-16 13:49

 

“Thank you, I actually bought one a few years back from you guys. I recently was trying to find you guys again to buy another one but unfortunately we forgot your seller name.  Ended up buying a shower head from another seller that claimed to have the best on the market.  Needless to say, that item was crap and was nothing compared to your guys product. It didn't have that high pressure stream that we where looking for like you guys have.  But I'm glad I found you guys again!! Your the best!  Ken"

Reply from ShowerBlaster:

Thank you for your kind words. Please enter them as your feedback. I take pride manufacturing the ShowerBlaster line of High Pressure showerheads since 2004.

It takes a lot of craftsmanship, honesty,  and not accepting anything less than perfection in what you do to make ShowerBlaster stand apart from the rest. -Fred

Two compliments from  loyal customers, and it summarizes what many have commented about ShowerBlaster during the past 12 years:

From : drakercom
on 11-14-2016

Hi, I've been using your Showerblaster for 10 years. Love it. And yes, I've accidentally purchased your competitors shit ones and threw them away. Do you have any videos on the SHOWER BLASTER 12.5 GPM DRENCHER? Thought I'd give your other shower heads a try too. Thanks, andy.

From:smallkinedeals

 

DUE TO LOWER OIL COSTS OUR PRICE IS NOW: $25.00 NO S&H!
FAST FREE DELIVERY (US ONLY)

International orders: Please request a S&H quote.

SHIPPING: I use US Postal Service's First Class with tracking of delivery for both domestic and international Shipments. It is very economical compared to Priority Mail.
INSURANCE: Shipments are not insured! If you wish to have your shipment insured against damage or theft, I suggest you make this known to me so that I may provide you a quote for S&H including insurance.

* TERMS & CONDITIONS FOR RETURNS OF ANY DEFECTIVE PRODUCTS: RETURN ORDER AUTHORIZATION (ROA) IS REQUIRED. FORM CAN BE REQUESTED TO SELLER WITHIN 14 DAYS FROM DATE OF RECEIPT OF SHOWERHEAD.

 

NOTE ONLY FOR & PAYPAL USERS: Starting August 2010 • Seller may cancellations and or refunds.

 

* US ASCII CODE TEST PRESSURE IS 80 PSI.    ** NORMAL WATER PRESSURE ? 45 PSI.

 

FOR ALL SHOWERS WORLDWIDE They MAKE WONDERFUL GIFTS

 

 

RECIPIENT WILL REMEMBER YOU EVERY TIME THEY SHOWER!!

 

 

 

100% COMPATIBLE WITH ALL STANDARD SHOWERARMS INSTALLS IN ABOUT A MINUTE

 

 

 

 

 

SIMPLE CONSTRUCTION, SUPER HI POWER!! CONVERTED TO PRE - 1960 "NO RESTRICTION STANDARDS" 

"NOW YOU TOO CAN SHOWER 5 TIMES FASTER"!!CHILDREN LOVE IT!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(description exceeds maximum possible length)