Disabled Toilet Pull Switch Wireless KP Alarm designed for easy & quick installation, the Pull Cord has a built in Battery powered Wireless Transmitter allowing it to be fitted into the most practical location, the small Siren assembly is powered by a 3-pin Transformer.


How it Works:

When the Wireless Pull Switch is pressed, the 40 Decibel Buzzer & Flashing Strobe LED will activate and remain ON until such time that the system is reset using the Reset Button (located at the bottom of the control box).

Addition Buzzer & Flashing Strobe assemblies can be added (no limit) together with additional Pull Switches (maximum of 20).

Operational Range:

The Wireless range between the Pull Switch and Siren assembly is 100 metres (line of sight), which equates to around 40 - 50 metres in most applications.

This can be extended by adding one or more signal repeaters to help push the wireless signal through walls and obstructions (if required), our reference 005-0760.

Reset Button:

The Siren assembly has the Reset Button located on the bottom of the Control Box, which is fine for most applications, it is possible for us to supply a system with a wireless reset if preferred. 

Buzzer:

This model is supplied with a 40 Decibel Buzzer, which is fine for most applications because it latches ON together with having a Flashing LED, we can however fit Louder or adjustable Sirens upon request.

Installation:

Installation is very simple:

  1. Fit the Siren assembly to the wall using 4 side mounted screw holes (it is weatherproof should you want to mount it outside).
  2. Power the Siren assembly up by plugging in a standard 3-pin Transformer (we recommend the socket is placed out of reach or sight).
  3. Fit the Pull Switch assembly FIRMLY onto the Ceiling.
  4. Test by pulling the Pull Switch.
  5. Reset by using the Reset Button.

You can add up to 19 additional Panic Buttons to this Alarm System, there are also different styles available which may suit your business.

This is a very Easy to Use & Fit Wireless Disabled Toilet Alarm.

Please Contact US should you have any questions


Kit Includes:

  • 1 x Wireless Buzzer Flashing Strobe Light Assembly.
  • 1 x 3-pin Plug in Transformer (2-pin available upon request).
  • 1 x Wireless Pull Switch Assembly.
  • 1 x Reset Button.
Specification:

Siren & Strobe Assembly:

  • Power Supply: Plug in 3-pin Transformer (2-pin available upon request).
  • Blue Flashing LED: Yes (when activated by either Panic Button).
  • Buzzer: 40 Decibel.
  • Duration of LED & Buzzer when Activated: Constant (Latched ON).
  • Reset Method: Reset Button.
  • Size: 200 (H) x 92 (W) x 95 (D) mm.
  • Wireless Range: 60 - 100 metres (line of sight).
  • Number of Wireless Transmitters can be used: Maximum 20.
  • Weatherproof: Yes.

Pull Switch:

  • Size of Assembly Base: 88 (L) x 88 (W) x 100 (D). 
  • Switch: Momentary.
  • Cord Length: 2 metres (can be shortened).

Transmitter:

  • Size: 40 (w) x 70 (w) x 17 (d) mm.
  • Power: 12v Battery (MN21)
  • Wireless Transmission Range: 100 metres (line of sight).

Ultra Secure Direct are a UK based company specializing in Security & Safety products. All products are despatched from our Northampton warehouses, technical support is also offered from the same location.